Flexible Wood
Wall Panels
The Natural Texture of Wood, Without Limitations
FIXMOR presents a new collection of flexible decorative panels finished with natural wood veneer. Designed for flat, curved and angled surfaces, they offer design freedom and quick installation on walls, furniture, counters and other interior applications.
The collection comprises two ranges: flexible wooden panels with sculpted MONT and LUNA profiles, and flexible acoustic panels with linear wood slats.
Product Ranges
Flexible Wooden Decorative Panel
Premium decorative panel with a natural wood veneer surface and flexible backing. It adapts to flat, curved or angled surfaces and can bend outwards or inwards, depending on the profile.
Supplied ready to install, it can be cut to the required dimensions. The natural surface may be left untreated or finished with stain, varnish or spray paint.
- Dimensions: 300 × 60 cm
- Profiles: MONT / LUNA
- MONT thickness: 10 mm (profile width 30 mm)
- LUNA thickness: 9 mm (profile width 37 mm)
- Surface: Premium AAA natural veneer
- Core: Engineered wood
- Colours: White Oak / Smoked Oak
- Use: Indoor use only
Flexible Acoustic Wood Panel
Decorative panel with natural wood veneer slats and a flexible acoustic polyester backing. It adapts to flat, curved and uneven surfaces, combining linear design with easy installation.
- Dimensions: 270 × 60 cm
- Overall thickness: 20 mm
- Slat width / spacing: 26 mm / 13 mm
- Surface: Natural wood veneer
- Core: Engineered wood
- Backing: Acoustic polyester
- Colours: White / Smoked
- Use: Indoor use only
Flexibility That Follows
Every Form
Flat, Curved & Angled Surfaces
The panels adapt to convex and concave surfaces, including sharp corners, creating continuous coverage and a clean architectural finish.
Walls, Columns & Furniture
Ideal for walls, columns, furniture fronts, reception counters, cabinets and bespoke interior applications.
Natural Wood Veneer
Real wood veneer in White Oak and Smoked Oak tones, with natural variations in colour and grain.
Ready to Install
Supplied ready to install and cut to the required dimensions on site.
Finish as Required
The natural surface may be left untreated or finished with stain, varnish or spray paint.
Easy Installation
01
Measure and Cut
Cut the panel to the required length with a circular saw. Depending on the backing, its width can be trimmed with a suitable utility knife.
02
Adhesive Installation
Apply lines of suitable silicone or construction adhesive to the back, then press the panel firmly onto the surface.
03
Alternatively, Use Screws
Acoustic panels may also be mechanically fixed through the backing with screws suitable for the wall construction.
04
Final Check
Check alignment, joints and full contact between the panel and the surface.
Explore the Full Collection
Download the Flexible Wood Wall Panels catalogue for the full collection, technical details and installation guidance.
Collection Gallery
Care & Maintenance
Natural Material. Simple Care.
For routine cleaning, lightly dust or wipe with a soft, slightly damp cloth. Avoid harsh cleaning products and excessive moisture.
In high-traffic areas, a protective varnish may be applied if compatible with the natural veneer. As this is real wood, slight variations in colour, grain and the final result after staining or varnishing are to be expected.
Important: these products are intended for indoor use only.